North Dakota DMV Practice Test 3
Practice Test 3 covers North Dakota's sign identification and precision rules — deer crossing warning sign meaning, school crossing sign meaning, railroad crossing with yield sign, flashing yellow beacon near roadway, advisory speed curve approach from a new angle, U-turn requirements, large vehicle following distance, divided roadway definition, and the complete range of North Dakota road rules. North Dakota's wildlife crossings, grain-belt railroads, and agricultural roads all require specific knowledge.
Why Take This North Dakota Practice Test?
Practice Test 3 introduces the deer crossing warning sign and school crossing sign from direct question angles — both tested on the NDDOT exam. North Dakota's rural roads are among the most deer-active in the US.
Sample Questions from This Test
The questions below come directly from this test's question bank. Each is based on the official North Dakota Driver Handbook. See how many you can answer before starting — then take the full test above for answers and complete explanations.
- What does a warning sign with a deer symbol mean?
- What does a school crossing sign warn drivers of?
- What does a yield sign at a railroad crossing require?
- What does a flashing yellow beacon near a roadway warn drivers to do?
- What should you do when approaching a curve with an advisory speed sign?
Take the test above to see correct answers and read the full explanations for every question.
North Dakota NDDOT Topics Covered in This Test
Every question in this test is drawn from the official North Dakota Driver Handbook. Here is a breakdown of the specific topics covered:
- Deer Crossing Warning Sign — deer frequently cross in this area; reduce speed and watch
- School Crossing Sign — pedestrians (children) cross road ahead; slow and watch
- Yield at Railroad Crossing — slow, look and listen; stop if train is approaching
- Flashing Yellow Beacon Near Roadway — hazardous condition; slow and proceed with caution
- Advisory Speed Curve Approach — slow to or below advisory speed before entering
- U-Turn Requirements — safe, legal, visibility, no prohibition
- Large Vehicle Following — stay far back; avoid blind spots; increase space
- Divided Roadway — physical separation between opposing traffic directions
- Regulatory Signs — what is required or prohibited
- Passing Prohibition Conditions — hills, curves, solid yellow, no-passing zone
- Uncontrolled Intersection Right-of-Way — yield to vehicle on right when simultaneous
- Service Signs — gas, food, lodging, rest area locations
- Roundabout Entry — yield to circulating traffic before entering
- Green Signal Check — verify intersection is clear before entering
- Four-Way Stop — first to stop proceeds; simultaneous yield to right
North Dakota NDDOT Test — Key Facts
Knowing the specific numbers and rules before your North Dakota written knowledge test gives you a real advantage. Here are the key facts for this test:
- Deer crossing warning in ND: North Dakota is one of the top deer-vehicle collision states in the US — these signs mark areas of frequent crossings
- School crossing sign in ND: Pentagonal shape (five sides) — children may cross the road ahead
- Yield at railroad crossing in ND: Slow, look and listen; stop if a train is approaching or you cannot see clearly
- Flashing yellow beacon near roadway in ND: Slow and proceed with caution — marks a specific hazard or danger point
- North Dakota wildlife: Deer are prolific throughout ND — especially active at dawn and dusk on rural roads
- ND advisory speed curves: Common on Badlands routes, river valley roads, and rolling prairie terrain
How to Use This Test Effectively
Getting the most out of your North Dakota DMV practice time takes more than clicking through questions. Use these strategies:
- North Dakota deer crossing signs: take them seriously. North Dakota consistently ranks among the top states for deer-vehicle collisions. When you see a deer crossing sign on a North Dakota road, reduce speed and actively scan both roadsides, especially at dawn and dusk.
- Railroad yield sign in North Dakota: slow and prepare to stop. Some North Dakota railroad crossings are marked with a yield sign rather than a crossbuck alone. Treat this as a yield at any intersection — slow, look and listen in both directions, and stop if a train is approaching.
- Flashing yellow beacon near North Dakota roadway: specific hazard ahead. When a flashing yellow beacon is mounted near the road — not at a traffic signal — it marks a specific danger point. Slow down and proceed with heightened alertness.
- North Dakota roundabout entry: yield to circulating traffic. Roundabouts in Bismarck, Fargo, Grand Forks, and throughout North Dakota require yielding to all traffic already in the roundabout. Enter only when there is a safe gap.
- Practice Test 3 reinforces all the precision NDDOT rules from new angles. Getting 90%+ confirms your knowledge is comprehensive for North Dakota's 25-question exam.
Frequently Asked Questions
What does Practice Test 3 cover?
Practice Test 3 covers deer crossing warning signs, school crossing signs, railroad yield signs, flashing yellow beacons near roadways, advisory speed curves, U-turn requirements, large vehicle following, divided roadways, regulatory signs, and the complete ND road rule system.
Why does North Dakota have so many deer crossing warning signs?
North Dakota consistently has one of the highest rates of deer-vehicle collisions in the US due to its large deer population and vast rural road network. Deer crossing signs mark areas of particularly frequent deer activity — reduce speed and watch carefully in these zones.
What does a yield sign at a North Dakota railroad crossing require?
Slow down significantly. Look both ways along the tracks. Listen for train sounds. Stop completely if a train is approaching or you cannot see clearly in both directions. Proceed only when completely certain it is safe.
What does a school crossing sign look like in North Dakota?
A pentagonal (five-sided) sign, typically yellow-green, showing figures of children walking. It warns drivers that children may be crossing the road ahead. Reduce speed and watch carefully for children near or in the crosswalk.
What should I do when approaching an advisory speed sign on a North Dakota curve?
Reduce your speed to at or below the posted advisory number before entering the curve. On North Dakota's Badlands routes and river valley roads, slow below the advisory speed on wet or icy roads. Never brake while already in the curve.
Complete Study Guide: All 50 Questions with Answers
All 50 questions from North Dakota Practice Test 3 are listed below with correct answers and explanations. This test covers deer crossing warning signs, school crossing signs, and railroad yield signs — North Dakota NDDOT rules that reflect the state's rural driving environment.
-
Q1. What does a flashing red signal require you to do?
Correct answer: Come to a complete stop
Why: A flashing red signal has the same meaning as a stop sign and requires a full stop.
-
Q2. What does a broken yellow center line allow?
Correct answer: Passing only when safe
Why: Broken yellow lines allow passing when it can be done safely.
-
Q3. What must drivers do when approaching a yield sign?
Correct answer: Slow down and yield if needed
Why: A yield sign requires slowing and yielding the right of way when necessary.
-
Q4. What is the default speed limit in a residential or business area unless posted?
Correct answer: 25 mph
Why: The default speed limit is 25 mph unless otherwise posted.
-
Q5. What does a solid yellow line on your side of the road mean?
Correct answer: No passing
Why: A solid yellow line means passing is not allowed on that side.
-
Q6. What must drivers do when an emergency vehicle approaches using lights and siren?
Correct answer: Pull to the right and stop
Why: Drivers must pull to the right edge of the roadway and stop.
-
Q7. What does a green traffic signal mean?
Correct answer: Proceed if the intersection is clear
Why: A green light means go if the intersection is clear.
-
Q8. When must drivers stop for a school bus with red flashing lights?
Correct answer: When approaching from either direction
Why: Drivers in both directions must stop when red lights are flashing.
-
Q9. What does a two-way left turn lane indicate?
Correct answer: Lane for left turns only
Why: The center lane is reserved only for left turns.
-
Q10. What should you do when traffic signals are dark due to a power outage?
Correct answer: Treat the intersection as a stop
Why: Drivers must treat dark signals as stop signs.
-
Q11. What does a round yellow sign with an X and R warn of?
Correct answer: Railroad crossing ahead
Why: Round yellow signs warn drivers of railroad crossings.
-
Q12. What is the speed limit on gravel or dirt roads unless posted otherwise?
Correct answer: 55 mph
Why: The default speed limit on gravel roads is 55 mph.
-
Q13. What does a flashing yellow traffic signal mean?
Correct answer: Proceed with caution
Why: Flashing yellow signals warn drivers to use caution.
-
Q14. Who has the right of way at an uncontrolled intersection?
Correct answer: The vehicle on the right
Why: At uncontrolled intersections, vehicles on the left must yield.
-
Q15. What should you do before changing lanes?
Correct answer: Signal and check mirrors and blind spots
Why: Drivers must signal and ensure the lane is clear before changing lanes.
-
Q16. What does a yield sign at a railroad crossing require?
Correct answer: Slow and stop if a train is approaching
Why: Drivers must slow and be prepared to stop if a train is present.
-
Q17. What does a green arrow traffic signal indicate?
Correct answer: Proceed in the direction of the arrow
Why: A green arrow allows movement in the arrow’s direction.
-
Q18. What does a solid white stop line show?
Correct answer: Where vehicles must stop
Why: Stop lines mark where vehicles must stop at intersections.
-
Q19. When are you prohibited from passing another vehicle?
Correct answer: Near hills or curves
Why: Passing near hills or curves is prohibited due to limited visibility.
-
Q20. What must drivers do when pedestrians are in a crosswalk?
Correct answer: Yield and stop
Why: Drivers must yield to pedestrians in crosswalks.
-
Q21. What does a solid yellow centerline mean?
Correct answer: No passing in either direction
Why: Solid yellow lines mean no passing.
-
Q22. What is the recommended following distance method?
Correct answer: Three-second rule
Why: The three-second rule helps maintain safe following distance.
-
Q23. What should you do when approaching a work zone?
Correct answer: Slow down and obey signs
Why: Work zones require reduced speed and attention.
-
Q24. What does a crossbuck sign indicate?
Correct answer: Railroad crossing
Why: Crossbuck signs mark railroad crossings.
-
Q25. What does a warning sign with a deer symbol mean?
Correct answer: Deer crossing area
Why: Deer crossing signs warn of possible animal crossings.
-
Q26. What must you do when making a turn?
Correct answer: Signal for at least 100 feet
Why: Turn signals must be used for the last 100 feet before turning.
-
Q27. What does a guide sign usually provide?
Correct answer: Directions and distances
Why: Guide signs give directions, distances, and services.
-
Q28. What should drivers do when being passed by another vehicle?
Correct answer: Maintain speed or slow slightly
Why: Drivers should not speed up when being passed.
-
Q29. What does a flashing red light at a railroad crossing mean?
Correct answer: Stop and wait
Why: Flashing red lights at railroad crossings require a stop.
-
Q30. What does a one-way sign indicate?
Correct answer: Traffic flows in one direction
Why: One-way signs show traffic moves in a single direction.
-
Q31. What should you do if your vehicle stalls on railroad tracks?
Correct answer: Exit and move away from the tracks
Why: Drivers should exit immediately and move away from the tracks.
-
Q32. What does a red slash symbol on a sign indicate?
Correct answer: Prohibited action
Why: A red slash means the action shown is prohibited.
-
Q33. What does a steady yellow traffic light warn drivers to do?
Correct answer: Prepare to stop
Why: Yellow lights warn the signal is about to change to red.
-
Q34. What should you do when approaching an intersection with a stop sign?
Correct answer: Come to a complete stop
Why: Stop signs require a full stop before the intersection.
-
Q35. What does a divided roadway indicate?
Correct answer: Traffic separated by a median
Why: Divided roadways separate traffic with a median.
-
Q36. When must drivers increase following distance?
Correct answer: When roads are slippery
Why: Slippery roads require more stopping distance.
-
Q37. What does a school crossing sign warn drivers of?
Correct answer: Children crossing
Why: School crossing signs warn of children crossing the roadway.
-
Q38. What should you do when entering a roundabout?
Correct answer: Yield to traffic already circulating
Why: Drivers must yield to vehicles already in the roundabout.
-
Q39. What does a service sign usually show?
Correct answer: Available services
Why: Service signs show services such as gas or hospitals.
-
Q40. What does a broken white line separate?
Correct answer: Traffic moving in the same direction
Why: Broken white lines separate lanes moving in the same direction.
-
Q41. What must you do at a four-way stop?
Correct answer: First vehicle to stop goes first
Why: The first vehicle to stop proceeds at a four-way stop.
-
Q42. What does a regulatory sign indicate?
Correct answer: Traffic laws
Why: Regulatory signs state traffic laws that must be obeyed.
-
Q43. What should you do when approaching a curve with an advisory speed sign?
Correct answer: Slow to the advised speed
Why: Advisory speed signs show safe speeds for curves.
-
Q44. What does a yellow diamond-shaped sign indicate?
Correct answer: Warning
Why: Yellow diamond signs warn drivers of hazards.
-
Q45. What must drivers do when approaching an uncontrolled railroad crossing?
Correct answer: Slow down and look for trains
Why: Drivers must slow and check for trains at uncontrolled crossings.
-
Q46. What should you do before entering an intersection on a green light?
Correct answer: Make sure it is clear
Why: Drivers must ensure the intersection is clear before proceeding.
-
Q47. What does a no-passing zone sign indicate?
Correct answer: Passing prohibited
Why: No-passing zones prohibit passing.
-
Q48. What should drivers do when following a large vehicle?
Correct answer: Increase following distance
Why: Large vehicles block visibility and require more distance.
-
Q49. What is required before making a U-turn?
Correct answer: 500 feet of visibility
Why: U-turns require at least 500 feet of visibility.
-
Q50. What does a railroad advance warning sign look like?
Correct answer: Round and yellow
Why: Railroad advance warning signs are round and yellow.