Rhode Island DMV Permit Practice Quick Test: 25 Questions
Quick Test has 25 multiple-choice questions on Rhode Island driving rules, including double solid yellow, stop sign procedure, flashing red signal and Red-White yield triangle. Each answer is explained as soon as you pick it, and every question is listed with its answer in the study guide below.
More Rhode Island Practice Tests
What Quick Test Covers
The questions in this test ask about:
- Double Solid Yellow
- Stop Sign Procedure
- Flashing Red Signal
- Red-White Yield Triangle
- Broken Yellow Centerline
- Headlight Requirements
- Steady Yellow Signal
- Do Not Enter Sign
- Lane Change Prerequisites
- Solid White Edge Line
- 3-Second Following Distance
- Fog Headlights
- Wrong Way Sign
- Driveway Entry Yield
- No Passing Zone Sign
- Pedestrian Crosswalk Yield
- Skid Recovery
- Pentagon School Sign
- Railroad Flashing Lights
- Diamond Warning Sign
- Rain Begins After Dry Period
- Lane Ends Sign
- Stop Ahead Sign
Try 5 Questions from This Test
-
What does a solid double yellow line mean?
Show answer
A. Passing is prohibited in both directions
Double solid yellow lines prohibit passing for traffic in both directions.
-
What must a driver do at a stop sign?
Show answer
C. Come to a complete stop
Drivers must make a full stop before the stop line or crosswalk.
-
What does a flashing red traffic signal require?
Show answer
B. A complete stop before proceeding
A flashing red signal has the same meaning as a stop sign.
-
What does a triangular red and white sign indicate?
Show answer
C. Yield
A red and white triangle always means yield.
-
What does a broken yellow centerline indicate?
Show answer
B. Passing is allowed when safe
Broken yellow lines allow passing when conditions are safe.
Complete Study Guide: All 25 Questions with Answers
Every question in Quick Test, with the correct answer and an explanation for each.
-
Q1. What does a solid double yellow line mean?
Correct answer: Passing is prohibited in both directions
Why: Double solid yellow lines prohibit passing for traffic in both directions.
-
Q2. What must a driver do at a stop sign?
Correct answer: Come to a complete stop
Why: Drivers must make a full stop before the stop line or crosswalk.
-
Q3. What does a flashing red traffic signal require?
Correct answer: A complete stop before proceeding
Why: A flashing red signal has the same meaning as a stop sign.
-
Q4. What does a triangular red and white sign indicate?
Correct answer: Yield
Why: A red and white triangle always means yield.
-
Q5. What does a broken yellow centerline indicate?
Correct answer: Passing is allowed when safe
Why: Broken yellow lines allow passing when conditions are safe.
-
Q6. When must headlights be used?
Correct answer: From sunset to sunrise and during poor visibility
Why: Headlights are required at night and whenever visibility is limited.
-
Q7. What should a driver do when approaching a steady yellow traffic light?
Correct answer: Prepare to stop if it is safe
Why: A steady yellow warns the signal will soon turn red.
-
Q8. What does a ‘Do Not Enter’ sign mean?
Correct answer: Traffic may not enter
Why: This sign prohibits vehicles from entering the roadway.
-
Q9. What should drivers do before changing lanes?
Correct answer: Signal and check mirrors and blind spots
Why: Drivers must signal and make sure the lane is clear.
-
Q10. What does a solid white line on the edge of the road indicate?
Correct answer: The edge of the roadway
Why: Solid white edge lines mark the roadway boundary.
-
Q11. What is the safest following distance under normal conditions?
Correct answer: At least three seconds
Why: A three-second following distance allows time to react.
-
Q12. What should drivers do when visibility is reduced by fog?
Correct answer: Reduce speed and increase following distance
Why: Lower speed and added space improve safety in fog.
-
Q13. What does a ‘Wrong Way’ sign warn drivers?
Correct answer: They are traveling against traffic
Why: This sign warns drivers they are going the wrong direction.
-
Q14. What should drivers do when entering a roadway from a driveway?
Correct answer: Yield to all traffic
Why: Drivers entering a roadway must yield to traffic.
-
Q15. What does a ‘No Passing Zone’ sign indicate?
Correct answer: Passing is prohibited
Why: The sign marks areas where passing is unsafe.
-
Q16. What should drivers do when approaching pedestrians in a crosswalk?
Correct answer: Stop and yield
Why: Drivers must yield to pedestrians in crosswalks.
-
Q17. What should drivers do if their vehicle begins to skid?
Correct answer: Steer in the direction of the skid
Why: Steering into the skid helps regain control.
-
Q18. What does a pentagon-shaped sign indicate?
Correct answer: School zone or school crossing
Why: Pentagon-shaped signs warn of school areas.
-
Q19. What should drivers do when approaching a railroad crossing with flashing lights?
Correct answer: Stop
Why: Flashing railroad signals require a complete stop.
-
Q20. What does a diamond-shaped sign usually warn of?
Correct answer: Hazards or changes ahead
Why: Diamond-shaped signs provide warnings.
-
Q21. What should drivers do when rain begins after a dry period?
Correct answer: Slow down
Why: Oil buildup makes roads slippery at first.
-
Q22. What does a ‘Lane Ends’ sign warn drivers of?
Correct answer: A lane will end ahead
Why: Drivers should prepare to merge.
-
Q23. What should drivers do when backing a vehicle?
Correct answer: Look behind and check surroundings
Why: Checking surroundings prevents collisions.
-
Q24. What should drivers do when feeling very tired?
Correct answer: Stop driving and rest
Why: Rest is the only effective solution for fatigue.
-
Q25. What does a ‘Stop Ahead’ sign warn drivers of?
Correct answer: A stop sign ahead
Why: Drivers should be prepared to stop.