Alabama DMV Permit Practice Quick Test: 25 Questions

Published · Updated

Quick Test has 25 multiple-choice questions on Alabama driving rules, including advisory speed signs, lane markings, stop sign procedure and pedestrian Right-of-Way. Each answer is explained as soon as you pick it, and every question is listed with its answer in the study guide below.

Question 1
Select your answer
For Alabama test facts and FAQs, plus all 10 free tests, see the main Alabama Driver's Permit Practice Test page. You can also read the official Alabama Driver Manual. Testing in another state? See the free DMV practice tests for all 50 states and DC.

More Alabama Practice Tests

Practice by Topic

What Quick Test Covers

The questions in this test ask about:

  • Advisory Speed Signs
  • Lane Markings
  • Stop Sign Procedure
  • Pedestrian Right-of-Way
  • Lane Change Sequence
  • Broken Yellow Centerline
  • Rain and Weather Driving
  • Under-21 Alcohol Limit
  • Traffic Signal Not Working
  • Motorcycle Following Distance
  • Lane Reduction Warning
  • Fog Driving Technique
  • Posted Speed Limits
  • Stop Line Position

Try 5 Questions from This Test

  1. What should you do when approaching a curve marked with an advisory speed sign?

    • A. Slow down before entering the curve
    • B. Brake hard while turning
    • C. Maintain current speed
    Show answer

    A. Slow down before entering the curve

    Advisory speed signs show a safe speed for the curve.

  2. On a road with two or more lanes going the same way, what does a broken white line between the lanes mean?

    • A. The lane ends just ahead
    • B. Passing is prohibited
    • C. Lane changes are allowed when safe
    Show answer

    C. Lane changes are allowed when safe

    When a roadway has two or more lanes moving in one direction, the lanes are divided by broken white lines. These broken lines may be crossed when passing (Alabama Driver Manual, p. 52).

  3. What must a driver do when approaching a stop sign?

    • A. Yield only if traffic is present
    • B. Stop completely before proceeding
    • C. Slow down and roll through
    Show answer

    B. Stop completely before proceeding

    A full stop is required at stop signs.

  4. What does a yellow diamond-shaped sign generally warn of?

    • A. Traffic laws
    • B. Service areas
    • C. Possible hazards ahead
    Show answer

    C. Possible hazards ahead

    Yellow diamond signs warn drivers of hazards or changes in the road.

  5. What should you do when driving in fog?

    • A. Turn off headlights
    • B. Use low-beam headlights
    • C. Use high beams
    Show answer

    B. Use low-beam headlights

    Low beams reduce glare and improve visibility.

Alabama Quick Test FAQ: Advisory Speed Signs, Stop Lines and 4-Way Stops

What does the speed sign under a curve warning sign mean?

That yellow speed plate is an advisory sign. It shows the top safe speed at which you can make the turn, so slow to that speed before you enter the curve rather than braking halfway through it. You may also see yellow chevron signs, which warn of a sharp turn or curve in the direction of the arrows. They are normally placed in a series. (Alabama Driver Manual, p. 47)

What does a double solid yellow line mean?

Double solid yellow lines mean passing is not allowed for traffic in either direction. On two-lane roads the yellow center line is broken where you may pass when it's safe. Where passing is restricted, a solid yellow line is painted beside the broken one, and if the solid line is on your side, you may not pass. When neither direction may pass, two solid lines replace the broken one. (Alabama Driver Manual, p. 52)

Where exactly should you stop at a stop sign?

Stop at the marked stop line. If there's no stop line, stop before you enter the crosswalk on the near side of the intersection. If there's no crosswalk either, stop before entering the cross street at the point nearest the intersection where you can clearly see approaching traffic. Then proceed carefully; if your view was blocked, you may have to stop a second time. (Alabama Driver Manual, p. 60)

Who goes first at a 4-way stop if two cars arrive at the same time?

Cars leave a 4-way stop in the order they arrived, so the first to come to a complete stop goes first. If two or more vehicles arrive at the same time, the vehicle furthest to the right goes first. Even when it's your turn, wait a few seconds to make sure nobody else starts into the intersection, because many people don't follow the rule. (Alabama Driver Manual, p. 42)

Can you drive around railroad crossing gates?

No. Never drive around gates at a railroad crossing; it's against the law. If the gates are down, stay where you are and don't cross the tracks until they are raised. After the last car of a train passes, wait until you're sure no second train is coming on another track, especially from the other direction. And never try to race a train to the crossing. (Alabama Driver Manual, p. 40)

Complete Study Guide: All 25 Questions with Answers

Every question in Quick Test, with the correct answer and an explanation for each.

  1. Q1. What should you do when approaching a curve marked with an advisory speed sign?

    Correct answer: Slow down before entering the curve

    Why: Advisory speed signs show a safe speed for the curve.

  2. Q2. On a road with two or more lanes going the same way, what does a broken white line between the lanes mean?

    Correct answer: Lane changes are allowed when safe

    Why: When a roadway has two or more lanes moving in one direction, the lanes are divided by broken white lines. These broken lines may be crossed when passing (Alabama Driver Manual, p. 52).

  3. Q3. What must a driver do when approaching a stop sign?

    Correct answer: Stop completely before proceeding

    Why: A full stop is required at stop signs.

  4. Q4. What does a yellow diamond-shaped sign generally warn of?

    Correct answer: Possible hazards ahead

    Why: Yellow diamond signs warn drivers of hazards or changes in the road.

  5. Q5. What should you do when approaching pedestrians in a marked crosswalk?

    Correct answer: Yield and stop if necessary

    Why: Drivers must yield to pedestrians in crosswalks.

  6. Q6. What does a solid white edge line indicate?

    Correct answer: The edge of the roadway

    Why: Solid white edge lines mark the roadway boundary.

  7. Q7. What should you do before changing lanes?

    Correct answer: Check mirrors and blind spots

    Why: Checking blind spots helps prevent collisions.

  8. Q8. What does a blue traffic sign usually indicate?

    Correct answer: Motorist services

    Why: Blue signs provide service-related information.

  9. Q9. What does a broken yellow centerline mean?

    Correct answer: Passing is allowed when safe

    Why: Broken yellow lines allow passing when it can be done safely.

  10. Q10. What should you do when driving in heavy rain?

    Correct answer: Increase following distance

    Why: Rain reduces traction and increases stopping distance.

  11. Q11. What is Alabama's blood alcohol limit for drivers under 21?

    Correct answer: 0.02 percent

    Why: It is unlawful for a person under 21 to drive with a blood alcohol content of .02 percent or more (Alabama Driver Manual, p. 33).

  12. Q12. You are pulling out of a private driveway onto a public street. What must you do?

    Correct answer: Stop and yield to traffic on the street

    Why: Cars entering from a private road or driveway must stop and yield to cars on a public street or highway (Alabama Driver Manual, p. 63).

  13. Q13. What does a white rectangular traffic sign usually indicate?

    Correct answer: Traffic laws or regulations

    Why: White rectangular signs are regulatory signs.

  14. Q14. What should you do if your vehicle begins to skid?

    Correct answer: Steer in the direction you want the front to go

    Why: Steering into the skid helps regain control.

  15. Q15. What does a double solid yellow line indicate?

    Correct answer: No passing in either direction

    Why: Double solid yellow lines prohibit passing.

  16. Q16. What should you do when approaching a yield sign?

    Correct answer: Slow down and yield if necessary

    Why: Yield signs require giving right-of-way when needed.

  17. Q17. What does a solid white line between lanes indicate?

    Correct answer: Lane changes are discouraged

    Why: Solid white lines discourage lane changes.

  18. Q18. What should you do when backing up your vehicle?

    Correct answer: Look behind and around the vehicle

    Why: Drivers must check all areas before backing.

  19. Q19. What does a circular yellow sign with an X and RR warn of?

    Correct answer: A railroad crossing ahead

    Why: This sign warns of an upcoming railroad crossing.

  20. Q20. What should you do if traffic signals are not operating?

    Correct answer: Treat the intersection as a four-way stop

    Why: Four-way stop rules apply when signals are dark.

  21. Q21. What should you do when following a motorcycle?

    Correct answer: Keep at least the same 2-second distance, more when dark or wet

    Why: The Alabama manual says to give a motorcycle the same 2-second following distance as any other vehicle, and more when it is dark, raining or the road is wet (Alabama Driver Manual, p. 26).

  22. Q22. What does a lane reduction sign warn drivers about?

    Correct answer: Fewer lanes ahead

    Why: Lane reduction signs indicate merging traffic.

  23. Q23. What should you do when driving in fog?

    Correct answer: Use low-beam headlights

    Why: Low beams reduce glare and improve visibility.

  24. Q24. What does a posted speed limit sign show?

    Correct answer: The maximum lawful speed

    Why: Speed limit signs show the legal maximum speed.

  25. Q25. You are coming to a STOP sign, and a white stop line is painted across your lane. Where must you stop?

    Correct answer: At the stop line

    Why: A vehicle coming to a STOP sign must stop at the marked stop line. If there is no stop line, stop before entering the crosswalk on the near side of the intersection (Alabama Driver Manual, p. 60).

Question 1 of 25