Connecticut DMV Permit Practice Test 1: 50 Questions
Published · Updated
Practice Test 1 has 50 multiple-choice questions on Connecticut driving rules, including solid yellow line on your side, steady red light, flashing yellow signal and diamond-shaped sign. Each answer is explained as soon as you pick it, and every question is listed with its answer in the study guide below.
More Connecticut Practice Tests
Practice by Topic
What Practice Test 1 Covers
The questions in this test ask about:
- Solid Yellow Line on Your Side
- Steady Red Light
- Flashing Yellow Signal
- Diamond-Shaped Sign
- Flashing Red Signal
- Skid Recovery
- White Rectangular Sign
- Broken White Line
- Road Edge White Line
- No-Passing Zone Application
- Steady Yellow Light
- Green Arrow Signal
- Pentagon-Shaped Sign
- No-Passing Zone Pennant
- Green Signal
- Work Zone Compliance
- Safe Following Distance
- Stop Sign Procedure
Try 5 Questions from This Test
-
What does a solid yellow line on your side of the centerline mean?
Show answer
A. You may not pass from your side
When a solid yellow line runs beside a dashed yellow line, you may pass only from the dashed side, not from the solid side (Connecticut Driver's Manual, p. 44). Connecticut does let you cross it to pass slow-moving vehicles, bicyclists or parked vehicles, but only if you can see far enough ahead to do it safely (Connecticut Driver's Manual, p. 18).
-
When approaching a steady red traffic light, what must you do?
Show answer
B. Stop, and wait for green unless a turn on red is allowed
A steady red light means stop completely. Stay stopped until it turns green, unless you are making a turn on red that is allowed after a full stop.
-
What should you do when you see a flashing yellow traffic signal?
Show answer
A. Slow down and proceed with caution
A flashing yellow light means slow down and proceed with caution. A full stop is required at a flashing red light, not a flashing yellow (Connecticut Driver's Manual, p. 45).
-
What does a diamond-shaped traffic sign indicate?
Show answer
C. Warning
Diamond-shaped signs warn drivers of possible hazards ahead.
-
What does a yellow pennant-shaped sign indicate?
Show answer
A. No passing zone
Pennant-shaped signs mark the start of no-passing zones.
Complete Study Guide: All 50 Questions with Answers
Every question in Practice Test 1, with the correct answer and an explanation for each.
-
Q1. What does a solid yellow line on your side of the centerline mean?
Correct answer: You may not pass from your side
Why: When a solid yellow line runs beside a dashed yellow line, you may pass only from the dashed side, not from the solid side (Connecticut Driver's Manual, p. 44). Connecticut does let you cross it to pass slow-moving vehicles, bicyclists or parked vehicles, but only if you can see far enough ahead to do it safely (Connecticut Driver's Manual, p. 18).
-
Q2. When approaching a steady red traffic light, what must you do?
Correct answer: Stop, and wait for green unless a turn on red is allowed
Why: A steady red light means stop completely. Stay stopped until it turns green, unless you are making a turn on red that is allowed after a full stop.
-
Q3. What should you do when you see a flashing yellow traffic signal?
Correct answer: Slow down and proceed with caution
Why: A flashing yellow light means slow down and proceed with caution. A full stop is required at a flashing red light, not a flashing yellow (Connecticut Driver's Manual, p. 45).
-
Q4. What does a diamond-shaped traffic sign indicate?
Correct answer: Warning
Why: Diamond-shaped signs warn drivers of possible hazards ahead.
-
Q5. A child is 1 year old. How must the child ride in your car?
Correct answer: In a rear-facing car seat with a 5-point harness
Why: Children under age 2, or under 30 pounds, must ride in a rear-facing car seat with a 5-point harness (Connecticut Driver's Manual, p. 12).
-
Q6. You're driving through a school zone with a lower posted speed limit, and you don't see any children. What should you do?
Correct answer: Obey the slower school zone speed limit anyway
Why: Children can be around outside school hours, so you must obey the slower posted school zone speed limit. Stop if a crossing guard signals you to (Connecticut Driver's Manual, p. 16).
-
Q7. What should you do before changing lanes?
Correct answer: Signal and check mirrors and blind spots
Why: You must signal and check mirrors and blind spots before changing lanes.
-
Q8. What does a flashing red traffic signal mean?
Correct answer: Stop, then go when safe
Why: A flashing red light is treated the same as a stop sign.
-
Q9. Your car begins to skid on a slippery road. Which way should you steer?
Correct answer: In the direction you want the car to go
Why: Stay off the brake and turn the steering wheel in the direction you want the car to go. As soon as it starts to straighten out, turn the wheel back so you don't start a new skid (Connecticut Driver's Manual, p. 40).
-
Q10. A white rectangular sign with black letters says SPEED LIMIT 40. What type of sign is it?
Correct answer: Regulatory sign
Why: Many black-and-white signs are regulatory signs that tell you the law and must be obeyed (Connecticut Driver's Manual, p. 47). The speed limit sign is listed among the regulatory signs (Connecticut Driver's Manual, p. 48).
-
Q11. When approaching a yield sign, you must:
Correct answer: Slow down and give right-of-way if needed
Why: A yield sign requires slowing and yielding to traffic when necessary.
-
Q12. What should you do at an intersection with no signs or signals?
Correct answer: Yield to traffic on the right
Why: You must yield to vehicles approaching from the right.
-
Q13. What is the safest way to back a vehicle?
Correct answer: Turning your head and looking behind
Why: Turning your head allows you to see hazards directly behind you.
-
Q14. What does a red octagon-shaped sign mean?
Correct answer: Stop
Why: An octagon shape always indicates a stop sign.
-
Q15. When driving in fog, you should use:
Correct answer: Low-beam headlights
Why: Low beams reduce glare and improve visibility in fog.
-
Q16. What is the correct action when an emergency vehicle approaches with sirens on?
Correct answer: Pull over and stop
Why: You must pull over and stop to allow emergency vehicles to pass.
-
Q17. What does a broken white line between lanes mean?
Correct answer: Lane changing is allowed
Why: Broken white lines allow lane changes when safe.
-
Q18. What should you do when entering a highway from an on-ramp?
Correct answer: Match traffic speed and merge
Why: You should adjust speed to match traffic and merge smoothly.
-
Q19. What is the purpose of road edge lines?
Correct answer: Mark the edge of the roadway
Why: Edge lines show where the roadway ends.
-
Q20. You're turning at a corner with no painted crosswalk lines, and a pedestrian is crossing there. What must you do?
Correct answer: Yield, because every intersection has a crosswalk even if it isn't painted
Why: There is a crosswalk at every intersection, even if it is not marked by painted lines. Drivers must slow or stop and let a pedestrian in a marked or unmarked crosswalk cross (Connecticut Driver's Manual, p. 16).
-
Q21. What should you do if traffic signals are not working?
Correct answer: Treat the intersection as a four-way stop
Why: Non-working signals require drivers to treat the intersection as a stop.
-
Q22. What does a no-passing zone mean in Connecticut?
Correct answer: Don't pass, except to safely get around slow-moving vehicles, bicyclists or parked vehicles
Why: No-passing zones mark places where you can't see far enough ahead to pass. Connecticut does allow passing slow-moving vehicles, bicyclists, parked vehicles, pedestrians or animals there, but only if you can see far enough ahead to pass safely (Connecticut Driver's Manual, p. 18).
-
Q23. What is the correct response to a steady yellow traffic light?
Correct answer: Stop if it is safe
Why: A steady yellow warns the light is about to turn red.
-
Q24. Traffic ahead stops suddenly. You brake hard in a car without antilock brakes (ABS), and the wheels lock and start to skid. What should you do?
Correct answer: Quickly let up on the brake, then press again
Why: Without ABS, brake as hard as you can without locking the wheels. If they lock and the car starts to skid, quickly let up on the brake pedal, then press down again once the skid stops. Repeat until you stop. (Connecticut Driver's Manual, p. 40)
-
Q25. When driving at night, how can you reduce glare from oncoming headlights?
Correct answer: Look toward the right edge of the road
Why: Looking right helps reduce glare and maintain lane position.
-
Q26. What does a green arrow signal mean?
Correct answer: Proceed only in the arrow direction
Why: A green arrow allows movement in the direction shown.
-
Q27. What should you do when approaching a railroad crossing with flashing lights?
Correct answer: Stop and wait
Why: Flashing lights mean a train is approaching and you must stop.
-
Q28. Where should your hands be on the steering wheel?
Correct answer: On opposite sides: left hand between 8 and 10 o'clock, right hand between 2 and 4 o'clock
Why: Place both hands on opposite sides of the wheel, left hand between 8 and 10 o'clock and right hand between 2 and 4 o'clock (Connecticut Driver's Manual, p. 14).
-
Q29. What does a pentagon-shaped sign usually indicate?
Correct answer: School zone or crossing
Why: Pentagon signs warn of school zones and crossings.
-
Q30. You're driving exactly at the posted speed limit on an icy road. Could you still get a ticket?
Correct answer: Yes, for driving too fast for road conditions
Why: Speed limits are set for ideal conditions. On wet or icy roads, in poor visibility, or in heavy traffic you must slow down, and you can get a ticket even at the posted limit (Connecticut Driver's Manual, p. 36).
-
Q31. When should you use your horn?
Correct answer: To warn others of danger
Why: Use your horn as a warning when it can help prevent a crash. If there's no immediate danger, a light tap is enough; save a sharp blast for real danger. Don't use it to rush someone or point out their mistake (Connecticut Driver's Manual, p. 38).
-
Q32. What should you do if your tire blows out?
Correct answer: Grip the wheel and slow gradually
Why: Gradual slowing helps maintain control.
-
Q33. What does a white arrow painted in your lane show?
Correct answer: Which way you may go from that lane, such as turning
Why: Pavement markings show which lanes to use for turns (Connecticut Driver's Manual, p. 43). Painted arrows back up the signs that show which movements are allowed from a lane (Connecticut Driver's Manual, p. 48).
-
Q34. What is the safest way to handle a curve?
Correct answer: Slow before entering
Why: Slowing before the curve improves control.
-
Q35. What should you do when approaching a crosswalk with pedestrians?
Correct answer: Yield and stop
Why: Drivers must stop and yield to pedestrians in crosswalks.
-
Q36. On a divided highway, what does a solid yellow line along the left side of your lane mark?
Correct answer: The left edge of the roadway
Why: Edge lines show where the edge of the road is. Solid white edge lines are on the right, and solid yellow edge lines are on the left edge of divided roads (Connecticut Driver's Manual, p. 43).
-
Q37. On a two-lane road, where is it dangerous to pass another vehicle?
Correct answer: At an intersection or railroad crossing
Why: Don't pass where vehicles are likely to enter or cross the road, such as intersections, railroad crossings and shopping center entrances. While passing, your view of people, vehicles or trains can be blocked (Connecticut Driver's Manual, p. 23).
-
Q38. What should you do if you miss your exit on a highway?
Correct answer: Continue to the next exit
Why: Continuing to the next exit is the safest option.
-
Q39. What does a red X signal over a lane mean?
Correct answer: Lane closed
Why: A red X means the lane must not be used.
-
Q40. You and another car arrive at a four-way stop at the same time. Who goes first?
Correct answer: The vehicle on the right
Why: At a four-way stop, the first driver to arrive goes first after a complete stop. If two arrive at the same time, the vehicle on the right goes first (Connecticut Driver's Manual, p. 36).
-
Q41. What should you do when driving in heavy rain?
Correct answer: Slow down
Why: Slowing down improves traction and control.
-
Q42. What does a yellow pennant-shaped sign indicate?
Correct answer: No passing zone
Why: Pennant-shaped signs mark the start of no-passing zones.
-
Q43. You're driving with three passengers, two of them in the back seat. Under Connecticut law, who must wear a seat belt?
Correct answer: You and every passenger
Why: In Connecticut, it is illegal to drive or ride as a passenger without wearing a seat belt. The driver and each passenger can be cited (Connecticut Driver's Manual, p. 12).
-
Q44. When should you turn on your turn signal?
Correct answer: Before the turn
Why: Signals should be used before turning to warn others.
-
Q45. What does a green traffic light mean?
Correct answer: Go if the way is clear
Why: A green light means you can go through the intersection when it is safe. You must still yield to emergency vehicles, and to pedestrians crossing when you turn (Connecticut Driver's Manual, p. 45).
-
Q46. A motorcycle ahead of you is riding near the left side of its lane. May you pass it without leaving that lane?
Correct answer: No. Never pass a motorcycle in the same lane, because it has the right to use the whole lane
Why: Motorcyclists have the right to a full traffic lane and need space to react. To pass, use the next lane, as you would for any other vehicle (Connecticut Driver's Manual, p. 18).
-
Q47. What does a double solid yellow centerline mean?
Correct answer: No passing from either side
Why: Two solid yellow lines mark the center of a road with traffic going in opposite directions, and passing is not allowed from either side. You may cross them to turn left into or out of a driveway, alley or street (Connecticut Driver's Manual, p. 44). Connecticut also lets you cross them to pass slow-moving vehicles, bicyclists, parked vehicles, pedestrians or animals, but only if you can see far enough ahead to pass safely (Connecticut Driver's Manual, p. 18).
-
Q48. What should you do when approaching a work zone?
Correct answer: Slow down and follow signs
Why: Work zones require reduced speed and extra caution.
-
Q49. What is the safest following distance under normal conditions?
Correct answer: At least three seconds
Why: Connecticut’s driver manual teaches the three-second rule: follow no closer than three seconds, and leave four seconds or more on slippery roads and in other risky situations.
-
Q50. What should you do when approaching a stop sign?
Correct answer: Stop completely
Why: A stop sign requires a full stop before proceeding.