Minnesota DMV Permit Practice Quick Test: 25 Questions
Quick Test has 25 multiple-choice questions on Minnesota driving rules, including private road entry, steady red arrow, flashing yellow arrow and uncontrolled intersection. Each answer is explained as soon as you pick it, and every question is listed with its answer in the study guide below.
More Minnesota Practice Tests
What Quick Test Covers
The questions in this test ask about:
- Private Road Entry
- Steady Red Arrow
- Flashing Yellow Arrow
- Uncontrolled Intersection
- Solid Yellow on Your Side
- Railroad No Lights/Gates
- Minnesota Alley Speed
- School Bus Undivided Road
- Broken Yellow Centerline
- Lane Change Prerequisites
- Octagon Stop Sign
- Work Zone Approach
- Diamond Warning Sign
- Being Passed
- Double Solid Yellow
- Move Over Stopped Emergency
- Broken White Lane Line
- 3-Second Following Distance
- Round Yellow Railroad Sign
- Dark Signal
- Left Turn Yield
- Pentagon School Sign
- Backing Procedure
- Orange Construction Sign
- Sudden Worsening Conditions
Try 5 Questions from This Test
-
What must a driver do when entering traffic from a private road?
Show answer
B. Yield to traffic already on the roadway
Drivers entering from private roads must yield to traffic already on the roadway.
-
What does a steady red arrow mean?
Show answer
A. Come to a complete stop
A steady red arrow requires a complete stop before turning.
-
What does a flashing yellow arrow allow a driver to do?
Show answer
B. Turn with caution
A flashing yellow arrow allows a turn after yielding to oncoming traffic.
-
Who has the right-of-way at an uncontrolled intersection?
Show answer
A. The driver on the right
When vehicles arrive at the same time, the driver on the right has the right-of-way.
-
What is the speed limit in an alley unless posted otherwise?
Show answer
C. 10 mph
Alleys have a maximum speed limit of 10 mph unless otherwise posted.
Complete Study Guide: All 25 Questions with Answers
Every question in Quick Test, with the correct answer and an explanation for each.
-
Q1. What must a driver do when entering traffic from a private road?
Correct answer: Yield to traffic already on the roadway
Why: Drivers entering from private roads must yield to traffic already on the roadway.
-
Q2. What does a steady red arrow mean?
Correct answer: Come to a complete stop
Why: A steady red arrow requires a complete stop before turning.
-
Q3. What does a flashing yellow arrow allow a driver to do?
Correct answer: Turn with caution
Why: A flashing yellow arrow allows a turn after yielding to oncoming traffic.
-
Q4. Who has the right-of-way at an uncontrolled intersection?
Correct answer: The driver on the right
Why: When vehicles arrive at the same time, the driver on the right has the right-of-way.
-
Q5. What does a solid yellow line on your side of the road mean?
Correct answer: Passing prohibited
Why: A solid yellow line on your side prohibits passing.
-
Q6. What should drivers do when approaching a railroad crossing with no lights or gates?
Correct answer: Slow down and look both ways
Why: Drivers must slow down and look for trains at unprotected crossings.
-
Q7. What is the speed limit in an alley unless posted otherwise?
Correct answer: 10 mph
Why: Alleys have a maximum speed limit of 10 mph unless otherwise posted.
-
Q8. What should drivers do when a school bus is stopped with flashing red lights on an undivided road?
Correct answer: Stop
Why: Drivers in both directions must stop for a school bus with flashing red lights.
-
Q9. What does a broken yellow center line indicate?
Correct answer: Passing allowed when safe
Why: Broken yellow lines allow passing when it can be done safely.
-
Q10. What is required before changing lanes?
Correct answer: Signal and check blind spots
Why: Drivers must signal and check blind spots before changing lanes.
-
Q11. What does an octagon-shaped sign always mean?
Correct answer: Stop
Why: Octagon-shaped signs are used only for stop signs.
-
Q12. What should drivers do when approaching a work zone?
Correct answer: Slow down and stay alert
Why: Work zones require reduced speed and increased attention.
-
Q13. What does a diamond-shaped sign usually indicate?
Correct answer: Warning
Why: Diamond-shaped signs warn drivers of hazards or special conditions.
-
Q14. What should drivers do when being passed by another vehicle?
Correct answer: Maintain speed or slow slightly
Why: Drivers should not increase speed when being passed.
-
Q15. What does a double solid yellow line mean?
Correct answer: Passing prohibited both ways
Why: Double solid yellow lines prohibit passing in both directions.
-
Q16. What should drivers do when approaching an emergency vehicle stopped with flashing lights?
Correct answer: Move over and slow down
Why: Drivers must move over when possible and reduce speed.
-
Q17. What does a broken white lane line indicate?
Correct answer: Lane changes allowed
Why: Broken white lines allow lane changes when safe.
-
Q18. What is the recommended following distance under ideal conditions?
Correct answer: 3 to 4 seconds
Why: A 3 to 4 second following distance provides safe reaction time.
-
Q19. What does a round yellow sign warn drivers of?
Correct answer: Railroad crossing
Why: Round yellow signs warn of railroad crossings.
-
Q20. What must drivers do when traffic signals are not working?
Correct answer: Treat as an all-way stop
Why: Non-working signals must be treated as all-way stops.
-
Q21. What should drivers do when turning left at an intersection?
Correct answer: Yield to oncoming traffic
Why: Left-turning drivers must yield to oncoming traffic.
-
Q22. What does a pentagon-shaped sign indicate?
Correct answer: School zone or crossing
Why: Pentagon-shaped signs warn of school zones or crossings.
-
Q23. What should drivers do when backing a vehicle?
Correct answer: Turn head and look behind
Why: Drivers must turn their head and look behind when backing.
-
Q24. What does an orange sign indicate?
Correct answer: Work zone
Why: Orange signs warn of construction or work zones.
-
Q25. What should drivers do when road conditions change suddenly?
Correct answer: Adjust speed to conditions
Why: Drivers must adjust speed based on changing road conditions.