Oklahoma Permit Practice Test 1: 50 Questions
Practice Test 1 has 50 multiple-choice questions on Oklahoma driving rules, including Oklahoma work zone doubled fines, Slow-Moving vehicle emblem, hill crest approach and standing water response. Each answer is explained as soon as you pick it, and every question is listed with its answer in the study guide below.
More Oklahoma Practice Tests
What Practice Test 1 Covers
The questions in this test ask about:
- Oklahoma Work Zone Doubled Fines
- Slow-Moving Vehicle Emblem
- Hill Crest Approach
- Standing Water Response
- Animal on Roadway Response
- Detour Sign
- Flagperson Compliance
- Traffic Control Conflict
- Green Guide Signs
- Blue Service Signs
- Pavement Markings Purpose
- Solid White Edge Line
- Hill Approach Following
- Fog Driving
- Skid Recovery
Try 5 Questions from This Test
-
What happens to speeding fines in a construction zone when workers are present?
Show answer
B. Fines are doubled
Speeding fines are doubled in work zones.
-
What does a slow-moving vehicle emblem indicate?
Show answer
B. Vehicle travels 25 mph or less
The emblem identifies slow-moving vehicles.
-
What should drivers do when approaching a hill crest?
Show answer
A. Reduce speed
Visibility is limited over hill crests.
-
What should drivers do when approaching standing water on the road?
Show answer
C. Slow down
Slowing reduces hydroplaning risk.
-
What should drivers do when approaching animals on the roadway?
Show answer
C. Slow down and use caution
Slowing reduces collision risk.
Complete Study Guide: All 50 Questions with Answers
Every question in Practice Test 1, with the correct answer and an explanation for each.
-
Q1. What does a red octagonal sign require a driver to do?
Correct answer: Come to a complete stop
Why: A red octagonal sign always means stop.
-
Q2. What does a red and white triangular sign mean?
Correct answer: Yield
Why: A red and white triangle is a yield sign.
-
Q3. What does a solid double yellow centerline indicate?
Correct answer: Passing is prohibited in both directions
Why: Double solid yellow lines mean no passing either way.
-
Q4. What must a driver do at a flashing red traffic signal?
Correct answer: Stop completely before proceeding
Why: A flashing red signal has the same meaning as a stop sign.
-
Q5. What does a flashing yellow traffic signal mean?
Correct answer: Proceed with caution
Why: Flashing yellow warns drivers to slow down and use caution.
-
Q6. What does a broken yellow centerline allow?
Correct answer: Passing when safe
Why: A broken yellow line allows passing when safe.
-
Q7. What does a solid white line between lanes indicate?
Correct answer: Lane changes are discouraged
Why: Solid white lines discourage lane changes.
-
Q8. What does a circular yellow sign warn drivers about?
Correct answer: Railroad crossing ahead
Why: Circular yellow signs indicate railroad crossings.
-
Q9. What must drivers do when approaching a stop sign with a stop line?
Correct answer: Stop before the stop line
Why: Drivers must stop before the stop line or crosswalk.
-
Q10. What does a diamond-shaped sign usually warn of?
Correct answer: Hazards or changes ahead
Why: Diamond-shaped signs are warning signs.
-
Q11. What should a driver do at an uncontrolled intersection?
Correct answer: Yield to traffic on the right
Why: Drivers must yield to vehicles on the right.
-
Q12. What does a ‘Do Not Enter’ sign mean?
Correct answer: Traffic may not enter
Why: This sign prohibits vehicles from entering.
-
Q13. What does a ‘No Passing Zone’ sign indicate?
Correct answer: Passing is prohibited
Why: No passing zones indicate unsafe passing areas.
-
Q14. What does a steady yellow traffic light warn drivers of?
Correct answer: The signal is about to turn red
Why: A steady yellow light warns the signal will soon turn red.
-
Q15. What must drivers do when approaching a red traffic light?
Correct answer: Stop before the crosswalk
Why: Drivers must stop at a steady red light.
-
Q16. When may a driver turn right on red?
Correct answer: After stopping and yielding, unless prohibited
Why: Right turns on red are allowed after stopping unless signs prohibit it.
-
Q17. What does a green arrow signal allow?
Correct answer: Movement only in the arrow direction
Why: Green arrows permit movement only in the arrow direction.
-
Q18. What does a flashing yellow arrow mean?
Correct answer: Yield to oncoming traffic before turning
Why: Drivers must yield before turning on a flashing yellow arrow.
-
Q19. What does a flashing red arrow indicate?
Correct answer: Stop and wait for a green signal
Why: Flashing red arrows require a complete stop.
-
Q20. What should drivers do when approaching railroad tracks with flashing lights?
Correct answer: Stop and wait until lights stop
Why: Drivers must stop when railroad lights are flashing.
-
Q21. What must drivers do if a gate is lowered at a railroad crossing?
Correct answer: Stop and remain stopped
Why: Lowered gates require drivers to stop.
-
Q22. What does an orange sign indicate?
Correct answer: Construction or maintenance zone
Why: Orange signs warn of work zones.
-
Q23. What happens to speeding fines in a construction zone when workers are present?
Correct answer: Fines are doubled
Why: Speeding fines are doubled in work zones.
-
Q24. What must drivers do when directed by a flagperson?
Correct answer: Obey the flagperson’s instructions
Why: Drivers must obey flagpersons.
-
Q25. What does a slow-moving vehicle emblem indicate?
Correct answer: Vehicle travels 25 mph or less
Why: The emblem identifies slow-moving vehicles.
-
Q26. What do green guide signs provide?
Correct answer: Direction and distance information
Why: Green signs give guidance and travel information.
-
Q27. What are blue service signs used for?
Correct answer: Information about services
Why: Blue signs show services like gas or hospitals.
-
Q28. What must a driver do when pedestrians are in a crosswalk?
Correct answer: Yield the right-of-way
Why: Drivers must yield to pedestrians.
-
Q29. What is the purpose of pavement markings?
Correct answer: Guide and regulate traffic
Why: Pavement markings guide traffic movement.
-
Q30. What does a solid white edge line show?
Correct answer: The edge of the roadway
Why: Solid white lines mark the roadway edge.
-
Q31. What should drivers do when approaching a hill crest?
Correct answer: Reduce speed
Why: Visibility is limited over hill crests.
-
Q32. What should drivers do when approaching a curve?
Correct answer: Slow down before entering
Why: Reducing speed before curves helps maintain control.
-
Q33. What does a ‘Right Lane Ends’ sign warn drivers of?
Correct answer: Prepare to merge left
Why: Drivers should prepare to merge.
-
Q34. What should drivers do when visibility is reduced by fog?
Correct answer: Reduce speed and increase following distance
Why: Reduced visibility requires slower speeds.
-
Q35. What is required of drivers at a school zone when lights are flashing?
Correct answer: Reduce speed to posted limit
Why: Drivers must slow to the posted school speed.
-
Q36. What does a ‘Two-Way Traffic’ sign warn drivers of?
Correct answer: Oncoming traffic
Why: Drivers should expect traffic in both directions.
-
Q37. What does a ‘Keep Right’ sign instruct drivers to do?
Correct answer: Stay to the right of an obstruction
Why: Drivers must pass to the right.
-
Q38. What should drivers do when entering traffic from a driveway?
Correct answer: Yield to all traffic
Why: Drivers entering traffic must yield.
-
Q39. What should drivers do when backing a vehicle?
Correct answer: Check behind and surroundings
Why: Looking around prevents collisions.
-
Q40. What is the safest following distance under normal conditions?
Correct answer: At least three seconds
Why: A three-second gap allows reaction time.
-
Q41. What should drivers do if their vehicle begins to skid?
Correct answer: Steer in the direction of the skid
Why: Steering into the skid helps regain control.
-
Q42. What should drivers do when approaching animals on the roadway?
Correct answer: Slow down and use caution
Why: Slowing reduces collision risk.
-
Q43. What must drivers do when emergency vehicles approach with lights activated?
Correct answer: Yield the right-of-way
Why: Drivers must yield to emergency vehicles.
-
Q44. What should drivers do when driving at night and following another vehicle?
Correct answer: Use low-beam headlights
Why: Low beams prevent glare.
-
Q45. What does a ‘No U-Turn’ sign indicate?
Correct answer: U-turns are prohibited
Why: The sign prohibits U-turns.
-
Q46. What does a ‘Pedestrian Crossing’ sign warn drivers of?
Correct answer: Pedestrians may cross ahead
Why: Drivers should watch for pedestrians.
-
Q47. What should drivers do when road conditions become hazardous?
Correct answer: Slow down and increase following distance
Why: Lower speeds improve safety.
-
Q48. What does a ‘Detour’ sign indicate?
Correct answer: Temporary route around a closure
Why: Drivers must follow detour routes.
-
Q49. What should drivers do when approaching standing water on the road?
Correct answer: Slow down
Why: Slowing reduces hydroplaning risk.
-
Q50. What must drivers do when traffic control devices conflict?
Correct answer: Follow the device closest to you
Why: Temporary or closest controls take priority.