Oklahoma Permit Practice Test 4: 50 Questions

Practice Test 4 has 50 multiple-choice questions on Oklahoma driving rules, including road narrows sign, stop ahead sign, school zone flashing lights and oncoming headlight glare. Each answer is explained as soon as you pick it, and every question is listed with its answer in the study guide below.

Question 1
Select your answer
For Oklahoma test facts, what to bring and FAQs, see the Oklahoma permit test page. You can also read the official Oklahoma Driver Manual.

More Oklahoma Practice Tests

What Practice Test 4 Covers

The questions in this test ask about:

Try 5 Questions from This Test

  1. What does a ‘Road Narrows’ sign indicate?

    • A. Lane ends
    • B. Shoulder ends
    • C. Roadway width decreases ahead
    Show answer

    C. Roadway width decreases ahead

    Drivers should prepare for reduced roadway width.

  2. What does a ‘Stop Ahead’ sign warn drivers of?

    • A. A traffic signal ahead
    • B. A yield sign ahead
    • C. A stop sign ahead
    Show answer

    C. A stop sign ahead

    Drivers should prepare to stop.

  3. What should drivers do in a school zone when lights are flashing?

    • A. Proceed normally
    • B. Reduce speed to posted limit
    • C. Stop completely
    Show answer

    B. Reduce speed to posted limit

    Drivers must obey reduced school speed limits.

  4. What should drivers do when feeling extremely tired?

    • A. Open windows
    • B. Turn up music
    • C. Stop driving and rest
    Show answer

    C. Stop driving and rest

    Rest is the only effective solution for fatigue.

  5. What should drivers do when approaching glare from oncoming headlights?

    • A. Look toward the right edge of the road
    • B. Turn on high beams
    • C. Close eyes briefly
    Show answer

    A. Look toward the right edge of the road

    Looking right helps reduce glare.

Complete Study Guide: All 50 Questions with Answers

Every question in Practice Test 4, with the correct answer and an explanation for each.

  1. Q1. What does a solid yellow line on your side of the road mean?

    Correct answer: Passing is not allowed

    Why: A solid yellow line means passing is prohibited.

  2. Q2. What must drivers do at a flashing red traffic signal?

    Correct answer: Stop completely before proceeding

    Why: A flashing red signal has the same meaning as a stop sign.

  3. Q3. What does a red octagonal sign require?

    Correct answer: Stop

    Why: A red octagonal sign always means stop.

  4. Q4. What does a triangular red and white sign indicate?

    Correct answer: Yield

    Why: A red and white triangle always means yield.

  5. Q5. What does a broken yellow centerline allow?

    Correct answer: Passing when safe

    Why: A broken yellow line permits passing when safe.

  6. Q6. What does a flashing yellow traffic signal mean?

    Correct answer: Proceed with caution

    Why: A flashing yellow signal warns drivers to be cautious.

  7. Q7. What should drivers do at an uncontrolled intersection?

    Correct answer: Yield to traffic on the right

    Why: Drivers must yield to vehicles approaching from the right.

  8. Q8. What does a solid white line on the edge of the roadway show?

    Correct answer: The edge of the roadway

    Why: Solid white edge lines mark the roadway boundary.

  9. Q9. What should drivers do when approaching a steady yellow traffic light?

    Correct answer: Prepare to stop if safe

    Why: A steady yellow warns the signal will soon turn red.

  10. Q10. When may a driver turn right on red?

    Correct answer: After stopping and yielding unless prohibited

    Why: Right turns on red are allowed after stopping unless signs prohibit it.

  11. Q11. What does a green arrow signal indicate?

    Correct answer: Movement only in the arrow direction

    Why: A green arrow allows movement only in the arrow direction.

  12. Q12. What does a flashing yellow arrow mean?

    Correct answer: Yield to oncoming traffic before turning

    Why: Drivers must yield to oncoming traffic before turning.

  13. Q13. What does a flashing red arrow require?

    Correct answer: Stop and wait for a green signal

    Why: A flashing red arrow requires a complete stop.

  14. Q14. What should drivers do when approaching railroad tracks with flashing lights?

    Correct answer: Stop and wait

    Why: Drivers must stop until flashing lights stop.

  15. Q15. What does an orange traffic sign indicate?

    Correct answer: Construction or maintenance zone

    Why: Orange signs warn of work zones.

  16. Q16. What happens to speeding fines in work zones when workers are present?

    Correct answer: Fines are doubled

    Why: Speeding fines are doubled in active work zones.

  17. Q17. What must drivers do when directed by a flagperson?

    Correct answer: Obey the flagperson

    Why: Drivers must obey flagpersons.

  18. Q18. What does a slow-moving vehicle emblem indicate?

    Correct answer: Vehicle travels 25 mph or less

    Why: The emblem identifies slow-moving vehicles.

  19. Q19. What information do green guide signs provide?

    Correct answer: Direction and distance

    Why: Green signs provide guidance and destination information.

  20. Q20. What are blue service signs used for?

    Correct answer: Information about services

    Why: Blue signs indicate services such as fuel or hospitals.

  21. Q21. What must drivers do when pedestrians are in a crosswalk?

    Correct answer: Yield the right-of-way

    Why: Drivers must yield to pedestrians in crosswalks.

  22. Q22. What is the purpose of pavement markings?

    Correct answer: Guide and regulate traffic

    Why: Pavement markings guide traffic movement.

  23. Q23. What should drivers do when approaching a hill crest?

    Correct answer: Reduce speed

    Why: Visibility is limited over hill crests.

  24. Q24. What should drivers do before entering a curve?

    Correct answer: Slow down

    Why: Slowing before curves helps maintain control.

  25. Q25. What does a ‘Lane Ends’ sign warn drivers of?

    Correct answer: Prepare to merge

    Why: Drivers should prepare to merge safely.

  26. Q26. What should drivers do when visibility is reduced by fog?

    Correct answer: Reduce speed and increase following distance

    Why: Poor visibility requires slower speeds.

  27. Q27. What does a ‘Two-Way Traffic’ sign warn drivers of?

    Correct answer: Oncoming traffic

    Why: Drivers should expect traffic in both directions.

  28. Q28. What does a ‘Keep Right’ sign instruct drivers to do?

    Correct answer: Stay to the right of an obstruction

    Why: Drivers must pass to the right.

  29. Q29. What should drivers do when entering traffic from a driveway?

    Correct answer: Yield to all traffic

    Why: Drivers entering traffic must yield.

  30. Q30. What should drivers do when backing a vehicle?

    Correct answer: Check behind and surroundings

    Why: Checking surroundings prevents collisions.

  31. Q31. What is the safest following distance under normal conditions?

    Correct answer: At least three seconds

    Why: A three-second gap allows reaction time.

  32. Q32. What should drivers do if their vehicle begins to skid?

    Correct answer: Steer in the direction of the skid

    Why: Steering into the skid helps regain control.

  33. Q33. What should drivers do when approaching animals on the roadway?

    Correct answer: Slow down and use caution

    Why: Slowing reduces collision risk.

  34. Q34. What must drivers do when emergency vehicles approach with lights activated?

    Correct answer: Yield the right-of-way

    Why: Drivers must yield to emergency vehicles.

  35. Q35. What headlights should be used when following another vehicle at night?

    Correct answer: Low beams

    Why: Low beams prevent glare.

  36. Q36. What does a ‘No U-Turn’ sign indicate?

    Correct answer: U-turns are prohibited

    Why: The sign prohibits U-turns.

  37. Q37. What does a ‘Pedestrian Crossing’ sign warn drivers of?

    Correct answer: Pedestrians may cross

    Why: Drivers should watch for pedestrians.

  38. Q38. What should drivers do when road conditions become hazardous?

    Correct answer: Slow down and increase following distance

    Why: Reducing speed improves safety.

  39. Q39. What does a ‘Detour’ sign indicate?

    Correct answer: Temporary route around a closure

    Why: Drivers must follow detour routes.

  40. Q40. What should drivers do when approaching standing water on the roadway?

    Correct answer: Slow down

    Why: Slowing reduces hydroplaning risk.

  41. Q41. What does a circular yellow sign indicate?

    Correct answer: Railroad crossing ahead

    Why: Circular yellow signs warn of railroad crossings.

  42. Q42. What does a pentagon-shaped sign indicate?

    Correct answer: School zone or crossing

    Why: Pentagon signs identify school areas.

  43. Q43. What should drivers do in a school zone when lights are flashing?

    Correct answer: Reduce speed to posted limit

    Why: Drivers must obey reduced school speed limits.

  44. Q44. What should drivers do when feeling extremely tired?

    Correct answer: Stop driving and rest

    Why: Rest is the only effective solution for fatigue.

  45. Q45. What does a broken white line between lanes indicate?

    Correct answer: Lane changes allowed

    Why: Broken white lines allow lane changes.

  46. Q46. What should drivers do when approaching glare from oncoming headlights?

    Correct answer: Look toward the right edge of the road

    Why: Looking right helps reduce glare.

  47. Q47. What does a ‘Road Narrows’ sign indicate?

    Correct answer: Roadway width decreases ahead

    Why: Drivers should prepare for reduced roadway width.

  48. Q48. What should drivers do when approaching a stop line?

    Correct answer: Stop before the line

    Why: Vehicles must stop before the stop line.

  49. Q49. What does a ‘Stop Ahead’ sign warn drivers of?

    Correct answer: A stop sign ahead

    Why: Drivers should prepare to stop.

  50. Q50. What should drivers do when traffic control devices conflict?

    Correct answer: Follow the device closest to you

    Why: Temporary or closest controls take priority.

Question 1 of 50