South Carolina DMV Permit Practice Quick Test: 25 Questions
Published · Updated
Quick Test has 25 multiple-choice questions on South Carolina driving rules, including flashing yellow signal, yield sign approach, broken white lane lines and driveway entry yield. Each answer is explained as soon as you pick it, and every question is listed with its answer in the study guide below.
More South Carolina Practice Tests
Practice by Topic
What Quick Test Covers
The questions in this test ask about:
- Flashing Yellow Signal
- Yield Sign Approach
- Broken White Lane Lines
- Driveway Entry Yield
- Solid Yellow Centerline
- Headlight Requirements
- Stop Sign Procedure
- Diamond Warning Sign
- Dark Signal Procedure
- Green Signal
- Railroad Flashing Lights
- White Rectangular Sign
- Heavy Rain Driving
- Double Solid Yellow
- Left Turn Yield
- School Crossing Sign
- Emergency Vehicle Response
- Broken Yellow Centerline
- Motorcycle Following
- Flashing Red Signal
- Hill with Limited Visibility
- Yellow Warning Sign
- Fog Headlights
- Railroad Crossbuck
- Lane Change Prerequisites
Try 5 Questions from This Test
-
What does a flashing yellow traffic signal require a driver to do?
Show answer
A. Proceed with caution
A flashing yellow signal warns drivers to proceed carefully.
-
When approaching a yield sign, a driver must:
Show answer
C. Slow down and yield if necessary
Yield signs require drivers to give the right-of-way when needed.
-
What does a broken white line between lanes mean?
Show answer
B. Lane changes are permitted
Broken white lines allow lane changes when safe.
-
What should a driver do when entering traffic from a driveway?
Show answer
C. Yield to all roadway traffic
Drivers entering from driveways must yield to traffic on the road.
-
What does a solid yellow center line indicate?
Show answer
B. Passing is not allowed
Solid yellow lines prohibit passing.
Complete Study Guide: All 25 Questions with Answers
Every question in Quick Test, with the correct answer and an explanation for each.
-
Q1. What does a flashing yellow traffic signal require a driver to do?
Correct answer: Proceed with caution
Why: A flashing yellow signal warns drivers to proceed carefully.
-
Q2. When approaching a yield sign, a driver must:
Correct answer: Slow down and yield if necessary
Why: Yield signs require drivers to give the right-of-way when needed.
-
Q3. What does a broken white line between lanes mean?
Correct answer: Lane changes are permitted
Why: Broken white lines allow lane changes when safe.
-
Q4. What should a driver do when entering traffic from a driveway?
Correct answer: Yield to all roadway traffic
Why: Drivers entering from driveways must yield to traffic on the road.
-
Q5. What does a solid yellow center line indicate?
Correct answer: Passing is not allowed
Why: Solid yellow lines prohibit passing.
-
Q6. You are driving at night on a dark South Carolina road with no oncoming vehicles. What does the manual suggest?
Correct answer: Use your high beams, which let you see twice as far as low beams
Why: Use your high beams whenever there are no oncoming vehicles. High beams let you see twice as far as low beams.
-
Q7. What must a driver do at a stop sign?
Correct answer: Come to a complete stop
Why: Stop signs require a full stop.
-
Q8. What does a diamond-shaped warning sign indicate?
Correct answer: A possible hazard ahead
Why: Diamond-shaped signs warn of hazards or conditions ahead.
-
Q9. As your speed goes up, what happens to the distance you need to stop?
Correct answer: It increases
Why: The faster you are traveling, the more time and distance is needed to stop.
-
Q10. What does a green traffic signal mean?
Correct answer: Proceed when the intersection is clear
Why: Drivers may go on green when it is safe.
-
Q11. What should a driver do when approaching a railroad crossing with flashing lights?
Correct answer: Stop
Why: Flashing lights require drivers to stop.
-
Q12. What does a white rectangular sign usually indicate?
Correct answer: A traffic law or regulation
Why: White rectangular signs provide regulatory information.
-
Q13. What should a driver do when visibility is reduced by heavy rain?
Correct answer: Slow down
Why: Reduced visibility requires lower speeds.
-
Q14. What does a double solid yellow line mean?
Correct answer: No passing in either direction
Why: Double solid yellow lines prohibit passing.
-
Q15. When turning left at an intersection, a driver must yield to:
Correct answer: Oncoming traffic
Why: Left turns require yielding to oncoming traffic.
-
Q16. What does a school crossing sign warn drivers about?
Correct answer: Children may be present
Why: School crossing signs warn of children near the roadway.
-
Q17. What should a driver do if an emergency vehicle approaches with lights and siren?
Correct answer: Pull to the right and stop
Why: Drivers must yield and stop for emergency vehicles.
-
Q18. What does a broken yellow line mean?
Correct answer: Passing is allowed when safe
Why: Broken yellow lines allow passing when safe.
-
Q19. What should a driver do when following a motorcycle?
Correct answer: Allow extra following distance
Why: Motorcycles may stop quickly and need more space.
-
Q20. What does a flashing red traffic signal mean?
Correct answer: Stop completely before proceeding
Why: Flashing red signals have the same meaning as stop signs.
-
Q21. What should a driver do when approaching a hill with limited visibility?
Correct answer: Reduce speed
Why: Reduced speed improves safety when visibility is limited.
-
Q22. You park facing downhill next to a curb on the right side of the street. Which way should you turn your front wheels?
Correct answer: To the right, toward the curb
Why: With the wheels turned toward the curb, the car can't roll out into traffic. Set the parking brake too (South Carolina Driver's License Manual, p. 7-13).
-
Q23. What should a driver do when driving in fog?
Correct answer: Use low-beam headlights
Why: Low beams reduce glare in fog.
-
Q24. What does a railroad crossbuck sign require drivers to do?
Correct answer: Yield to trains
Why: Crossbuck signs require yielding to trains.
-
Q25. What should a driver do before changing lanes?
Correct answer: Check mirrors and blind spots
Why: Drivers must ensure lane changes can be made safely.