Utah Permit Practice Quick Test: 25 Questions
Quick Test has 25 multiple-choice questions on Utah driving rules, including solid red arrow, roundabout Right-of-Way, broken white lane lines and dark signal procedure. Each answer is explained as soon as you pick it, and every question is listed with its answer in the study guide below.
More Utah Practice Tests
What Quick Test Covers
The questions in this test ask about:
- Solid Red Arrow
- Roundabout Right-of-Way
- Broken White Lane Lines
- Dark Signal Procedure
- Diamond Warning Sign
- School Bus Flashing Red
- Solid Yellow Centerline
- Headlights Required
- Lane Change Prerequisites
- Flashing Yellow Signal
- Stop Sign Procedure
- Green Arrow Signal
- Circular Yellow Railroad Sign
- Freeway Entry
- Pentagon School Sign
- Pedestrian Crosswalk Yield
- Solid White Between Lanes
- Construction Zone Approach
- Brown Recreation Sign
- 2-Second Following Distance
- Advisory Speed Curve
- Do Not Enter Sign
- Fog Headlights
- Blocked Intersection View
Try 5 Questions from This Test
-
What does a steady red arrow require a driver to do?
Show answer
B. Stop and do not make the indicated turn
A steady red arrow means the indicated movement is prohibited until the signal changes.
-
When approaching a roundabout, who has the right-of-way?
Show answer
A. Traffic already in the roundabout
Drivers entering a roundabout must yield to traffic already circulating.
-
What does a broken white line between lanes indicate?
Show answer
B. Lane changes allowed when safe
Broken white lines separate lanes moving in the same direction and allow lane changes.
-
What should you do if a traffic signal is not working?
Show answer
A. Treat it as a stop sign
An inoperative traffic signal must be treated as a stop sign.
-
What does a diamond-shaped sign usually warn of?
Show answer
C. Road hazards or conditions
Diamond-shaped signs warn drivers of hazards or changes ahead.
Complete Study Guide: All 25 Questions with Answers
Every question in Quick Test, with the correct answer and an explanation for each.
-
Q1. What does a steady red arrow require a driver to do?
Correct answer: Stop and do not make the indicated turn
Why: A steady red arrow means the indicated movement is prohibited until the signal changes.
-
Q2. When approaching a roundabout, who has the right-of-way?
Correct answer: Traffic already in the roundabout
Why: Drivers entering a roundabout must yield to traffic already circulating.
-
Q3. What does a broken white line between lanes indicate?
Correct answer: Lane changes allowed when safe
Why: Broken white lines separate lanes moving in the same direction and allow lane changes.
-
Q4. What should you do if a traffic signal is not working?
Correct answer: Treat it as a stop sign
Why: An inoperative traffic signal must be treated as a stop sign.
-
Q5. What does a diamond-shaped sign usually warn of?
Correct answer: Road hazards or conditions
Why: Diamond-shaped signs warn drivers of hazards or changes ahead.
-
Q6. What should drivers do when approaching a stopped school bus with flashing red lights?
Correct answer: Stop
Why: Drivers must stop for school buses displaying flashing red lights.
-
Q7. What does a solid yellow line on your side of the road mean?
Correct answer: Passing prohibited
Why: A solid yellow line means passing is not allowed.
-
Q8. When must headlights be used?
Correct answer: From sunset to sunrise or when visibility is poor
Why: Headlights are required from sunset to sunrise and during low visibility.
-
Q9. What should drivers do before changing lanes?
Correct answer: Signal and check blind spots
Why: Drivers must signal and check mirrors and blind spots before changing lanes.
-
Q10. What does a flashing yellow traffic signal mean?
Correct answer: Proceed with caution
Why: A flashing yellow signal warns drivers to slow down and proceed carefully.
-
Q11. What is required at a stop sign?
Correct answer: Come to a complete stop
Why: Drivers must come to a full stop at stop signs.
-
Q12. Your car starts to skid on a wet Utah road. What does the handbook say to do first?
Correct answer: Slowly take your foot off the gas pedal
Why: Skidding can happen on wet roads. If you do skid, slowly take your foot off the gas pedal, steer in the direction the rear wheels are skidding, and do not slam on your brakes.
-
Q13. What does a green arrow signal allow?
Correct answer: Proceed only in the arrow direction
Why: A green arrow permits movement only in the direction shown.
-
Q14. What does a round yellow sign with an X and R indicate?
Correct answer: Railroad crossing ahead
Why: Round yellow signs warn drivers of railroad crossings.
-
Q15. What should drivers do when entering a freeway?
Correct answer: Match traffic speed and merge safely
Why: Drivers should adjust speed to match freeway traffic when merging.
-
Q16. What does a pentagon-shaped sign indicate?
Correct answer: School zone or crossing
Why: Pentagon-shaped signs warn drivers of school areas.
-
Q17. What should drivers do when approaching a pedestrian in a crosswalk?
Correct answer: Yield and allow crossing
Why: Drivers must yield to pedestrians in crosswalks.
-
Q18. What does a solid white line between lanes mean?
Correct answer: Lane changes discouraged
Why: Solid white lines discourage lane changes.
-
Q19. What should drivers do in a construction zone?
Correct answer: Slow down and obey posted signs
Why: Construction zones require reduced speeds and extra caution.
-
Q20. What does a brown traffic sign usually indicate?
Correct answer: Recreation or points of interest
Why: Brown signs guide drivers to recreational or cultural locations.
-
Q21. What is the recommended following distance under normal conditions?
Correct answer: Two seconds
Why: Utah’s driver handbook says to use the two-second rule and to increase your following distance in bad weather or poor visibility.
-
Q22. What should drivers do when approaching a curve warning sign?
Correct answer: Reduce speed before the curve
Why: Slowing before a curve improves vehicle control.
-
Q23. What does a do not enter sign indicate?
Correct answer: Entry is prohibited
Why: Do not enter signs prohibit entry into roadways.
-
Q24. What should drivers do when visibility is reduced by fog?
Correct answer: Use low beams and slow down
Why: Low beams reduce glare and improve visibility in fog.
-
Q25. What should drivers do if their view is blocked at an intersection?
Correct answer: Stop until the way is clear
Why: Drivers must ensure the intersection is clear before proceeding.